trabuco canyoncopperrainwater harvesting
This shows the eave where the gutter will mount, the rain barrel in position
The height of 72" should allow the downspout return to have a little bit of slope.
Basically, directly about the green water can the waterwheel will be placed. I will route the line from the pump inside the barrel through the slot in the wood columns and up to the roof edge
It's about 72" from where the top of the spout would be to the rain barrel that will serve as the catcher
The gutter will be a 6.5" half round copper.
The measurement from the tile edge is 46"
from the fascia where the gutter sits 42"
The water wheel will go on the left there, by the orange ladder where the green water can sits.